Starting Point:
Actuator in safe position
Procedure:

Turn the knob of the auxilliary switch until the tip of the arrow is pointing to the required switching position (see above). Eg: Switching to point setting = .4 corresponds to 40% angle of rotation.
When the actuator runs to the operating position (CCW), the switch knob will also rotate counter-clockwise (CCW) and the auxilliary switch will operate as the tip of the arrow passes the scale zero (S1 - S3 linked).
Starting Point:
Actuator in safe position
Procedure:

Turn the knob of the auxilliary switch until the tip of the arrow is pointing to the required switching position (see above). Eg: Switching to point setting = .4 corresponds to 40% angle of rotation.
When the actuator runs to the operating position (CW), the switch knob will also rotate clockwise (CW) and the auxilliary switch will operate as the tip of the arrow passes the scale zero (S1 - S3 linked).

Free Tell A Friend from Bravenet

  Useful Links
   Home Page
   H&V News
   DTI

 
Download pdf brochure
© Tri-Air Innovations Limited 2004. All rights reserved.